Description
Kenda 082991040C1 Bear Claw Tire 23x7-10
Brand: Kenda
MPN: 082991040C1
UPC: 47853435207
Depth: 23 inches
Height: 8 inches
Width: 23 inches
Weight: 21.81 lbs
Size: 23x7-10
Notes: Please note: Tire sizes vary by machine please check your current tire and wheel size before ordering. Adding oversize tires may alter the handling characteristics of your factory equipped vehicle. Extreme care must be used to prevent loss of control or roll over during sharp turns or abrupt maneuvers. Oversize tires may rub under extreme steering angles, and extreme suspension compression.
| Size | 23x7-10 |
|---|---|
| Tire Construction | Bias | Max Seating PSI | 36 |
| Max Operating PSI | 7 |
| Position | Front |
| Sidewall | Blackwall |
| Weight | 15.1 lbs. |
| Rim Size | 10 |
| Directional | Yes |
| Tread Depth | 17/32 |
| Ply Rating | 6 |
SAFETY
Refer to your machine’s documentation for proper maintenance. Always give tires a gentle “run-in” period of 100 miles to get the feel of new tires. Always match the front and rear tires for optimal handling, safety and performance. Mixing radials with bias may adversely affect handling and stability. Worn/unworn tire combinations and worn tires used in wet conditions can result in deteriorated handling.
WARNING
The charts and info on this page do not imply interchangeability. Consult your machine’s manual to determine correct replacements, clearances, compatibility and stability, load-bearing capacity, speed rating, radial vs. non-radial, pattern and tread compound requirements, inflation recommendations and front-to-rear tire matching. Wrong selection can result in tire failure or loss of control with serious injury or death.
